Hessarghatta, Bangalore, Karnataka
- GST NO. : 29AAACH3733L1ZE
RTDs
Leading Manufacturers, Exporters and Wholesaler of Bearing Resistance Temperature Detector, Mineral Insulated Resistance Temperature Detector, Resistance Temperature Detector, Resistance Temperature Detector with Thermowell and Slot Resistance Temperature Detector from Bangalore.
| Business Type | Manufacturer, Exporter, Supplier |
| Usage | Btd or Bearing Temperature Sensors are Used to Measure Temperature of the Bearing Case. |
| RTD Types | PT-50, PT-100, PT-200, PT-500, PT-1000 |
| Temperature Range | -200 to +600 ° C |
| Elements | Platinum Thin Film Rtd, Ceramic Wire Wound |
| Class of Tolerance (referencedin En 60751) | 1/3,1/10, Class A, Class B, Class C, Class Y & K |
| Standard RTD Mi Probe Sizes | 0 3,4.5,6,8 mm |
| Configurations | Duplex, Triplex |
| Grade of Protection | IP 55, IP 65, IP 67, Ccoe, Flame Proof |
| Type of Termination | Plug and Socket, IP Rated Head, Din and Explosion-proof Connection Head |
| Connectors | Mil Std, Nylon, Plastic, Ceramic |
| Type of Measurement | Air, Gas ,Liquid Immersion, Contact, Surface |
| Sheaths | SS 304, SS 316 Inconel 600, Inconel 800 |
Preferred Buyer From
| Location | Worldwide |
| Business Type | Manufacturer, Exporter, Supplier |
| Feature | The Sheath Would Be Flexible and Filled with Mgo. |
| RTD Types | PT-50,PT-100,PT-200, PT-500, PT-1000 |
| Temperature Range | -200 to +600 ° C |
| Elements | Platinum Thin Film Rtd, Ceramic Wire Wound |
| Class of Tolerance (Reference din En 60751) | 1/3,1/10, CLASS A,CLASS B,CLASS C,CLASS Y & K |
| Standard RTD MI PROBE Sizes | 0 3,4.5,6,8 mm |
| Configurations | Simplex, Duplex |
| Grade of Protection | IP 55,IP 65,IP 67, Atex, Ccoe, Flame Proof |
| Type of Termination | Plug and Socket,Ip Rated Head,Din and Explosion-proof Connection Head |
| Connectors | Mil Std, Nylon, Plastic, Ceramic |
| Type of Measurement | Air,Gas,Liquid Immersion,Contact,Surface |
| Sheaths | SS 304,00 316,55 310,00 446, Inconel 600,Inconel 800,Incoly Titanium, Inconel, Ceramic, APM |
Preferred Buyer From
| Location | Worldwide |
| Business Type | Manufacturer, Exporter, Supplier |
| RTD Types | PT-50, PT-100, PT-200, PT-500, PT-1000 |
| Temperature Range | -200 to +600 ° C |
| Elements | Platinum Thin Film Rtd, Ceramic Wire Wound |
| Class of Tolerance (reference Din En 60751) | 1/3,1/10, Class A, Class B, Class C, Class Y & K |
| Standard RTD MI Probe Sizes | 0 2, 3, 4.5, 6 ,8, 10, 12, 16,19, 20,21, 22,25 mm |
| Configurations | Simplex, Duplex, Triplex And Multipoint |
| Grade of Protection | IP 55,IP 65,IP 67, Atex , Ccoe, Flame Prrof |
| Type of Termination | Plug and Socket,Ip Rated Head,Din and Explosion-proof Connection Head |
| Connectors | Mil Std, Nylon, Plastic, Ceramic |
| Type of Measurement | Air, Gas, Liquid Immersion, Contact, Surface |
| Sheaths | SS 304,SS 316,SS 310,SS 446, Inconel 600,Inconel 800,Incoly Titanium, Inconel, Ceramic, Apm |
Preferred Buyer From
| Location | Worldwide |
| Business Type | Manufacturer, Exporter, Supplier |
| Types | Cylindrical Bar Stock, Bar Stock for Welding, Tube Stock with Narrowed Tip |
| STD Thermowell Materials | SS 304,316,316L, 310,Inconel 600, Inconel 800 |
| For Special Application | Monel, Hastelloy, Sandvik Af & Ceramic, Ptfecoating,Silicon nitride ,Carbide & Graphite for Molten |
Preferred Buyer From
| Location | Worldwide |
Strength versus accurate and fast temperature measurement is a balancing act. The factors which tend to produce high strength also tend to reduce the temperature sensors accuracy and speed of response. A properly selected thermowell will balance these opposing factors to produce a design capable of functioning satisfactorily in the intended application. selection.
| Business Type | Manufacturer, Exporter, Supplier |
| Usage | These Type of Sensors are Used for the Measurement of Temperature in Large Motors, Generators Etc |
| RTD Types | PT-100 /PT-1000 |
| Temperature Range | -50 to +200 ° C |
| Elements | Platinum Thin Film RTD, Ceramic Wire wound |
| Class of Tolerance (Reference din En 60751) | CLASS A,CLASS B |
| Configurations | Simplex &Duplex (3 or 4 wire ) |
| Connectors | Plastic (optional) |
| Lead Wire | Teflon Insulated (with or Without Shielded) Multistrand Wire |
| Sheaths | Fiber Glass Epoxy |
| Minimum Length | 50mm |
| Maximum Length | 50mm |
| Minimum Width | 10mm |
| Maximum Width | 50mm |
| Minimum Thicknes | 1 mm |
| Maximum Thickness | 5 mm |
Preferred Buyer From
| Location | Worldwide |
